E-mail: info@fdsp-cn.com
Tel: +86-025-66621288-808

Ring Die For Poultry Feed Pellet Mill

We (FDSP) can manufacture the ring dies of different materials, types and hole diameters which are compatible with all top brand pelletizers, such as ANDRITZ, CPM, BUHLER, ZHENGCHANG, MUYANG, SHENDE etc. Please offer the drawing and specifications of ring dies if you need. Ring die pellet mill...

Send Inquiry

We (FDSP) can manufacture the ring dies of different materials, types and hole diameters which are compatible with all top brand pelletizers, such as ANDRITZ, CPM, BUHLER, ZHENGCHANG, MUYANG, SHENDE etc.
Please offer the drawing and specifications of ring dies if you need.



Ring die pellet mill working principle

The basic structure of the pelletizing chamber is mainly composed of these parts: the die, the rollers, feeding scraper and cutting knives.

ring  die for feed pellet mill


When feed pellet mill is started, the electric motor will drive the ring die to rotate. And the rollers will also revolve on its own axis due to the friction between itself and the die. By means of gravity and the centrifugal force generated by rotating of the ring die, material will be firmly attached to inner surface of the ring die. The feeding scraper will ensure the material to be continuously and evenly pushed forward along the die to be prepared for pelletizing.

Then the material is squeezed by the roller and the die, and with the gradually increasing pressure, the density of the material also becomes higher. Thus the material temperature will rise, which softens the lignin in it and makes it easier to be shaped. At this time, the material is compressed into the die holes and shaped into small cylindrical strips with diameters of 2 - 12 mm (depending on the size of the holes).

roller and ring die





Relation between die hole structure and pelleting

1.Straight hole and release stepped hole

It is suitable for compound feed processing

2.External conical hole

It is suitable for the processing of high-fibre feed like de-fat chaff

3.Internal conical hole and compression-type stepped hole

This applicable for the process of herbage powder feed of light proportion 

We should try to avoid using release stepped hole(pressure-relief vent)

Because discharing is not easy for holes in the rows of the edge of ring die, pressure-relief vent is designed there.

QQ截图20160719142839 副本.jpg

We need to maintain and check the pellet mill's spare parts: ring dies, roller assembly,roller shell, gear shaft,screws, bearings, coupling etc. Because they are take up about 8% of the machine cost every year (primary for such as wood chipper, hammer mill and pellet mill.) 


Packing & Delivery


Packing & Delivery of ring die

DSC05979 副本-1.JPG

Packing & Delivery of ring die

DSC05989 副本-1.JPG





Hot Tags: ring die ring roller dies pellet dies pellet mill dies stainless steel die pellet ring die wood pellet die pellet machine parts pellet ring pellet mill die suppliers pellet die manufacturers pellet mill spare parts pellet ring die


Quick Message
Your privacy is important to us - we never sell or share your information.