E-mail: info@fdsp-cn.com
Tel: +86-025-66621288-808

Wood Pellet Production Line & Wood Log Pellet Palnt

Introduction of wood logs pellet line

The wood logs pellet line is a whole system automatic production line which suitable for raw 

materials like: wood logs, wood branch, wood chips, rice husk, rice straw, forest wood waste, 

wood waste and other biomass waste with different capacity.


Application of wood logs pellet line

Today, the biomass energy as a good kind of green, low carbon, environmental-friendly fuel has been used to replace traditional fossil fuels like coal, gas, petrol, etc. 

1.Burning in a stove to cook at home

2.Heat the house, school, hotel, or greenhouse, farm

3.Used in thermal power plants to replace coal

4.Used as cat litter to replace clay

5.Used as horse bedding, or beddings for cow, chicken, dogs, and other animals


Flowchart of wood logs pellet line

The wood logs production line includes wood chipping, wood crushing (if the raw material is not 

ready for granulated), material sieving, drying (if the raw material contains too much moisture), 

wood pellets pelletizing, cooling, screening and packing.


Main Machines of complete wood pellet production line:

1. Wood chipper( crush the big wood into small wood chips) 

2. Wood hammer mill( to grind the wood chips, rice husk, etc into smaller size below 6mm)

2. Dryer ( dry the raw material to proper moisture before making pellets) 

3. Pellet making( press raw material into pellets) 

4. Cooler( cool down pellets and remove some moisture) 

5. Sieve(remove dust, and broken pellets) 

6. Packing scale (pack pellets into bags of required weight, like 15kg/bag) 


Main process of wood pellet plant:

Crushing process - wood chipper and wood Hammer mill

The best material size for supporting to produce pellet is 1-5mm. Thus if your material

diameter exceed 5mm, then you need crushing machine to crush and grind them into small 

powder 1-5mm. Our LYGX series wood chipper and MFSP series hammer mill are your

best choice. After milled, the output size can reach 3-5 mm, then it is pushed to next process

to get dried and pelletized.

Drying process - Rotary Dryer

The best moisture content to pelletizing is about 12-18%. Our rotary dryer is made up of 

burning stove and main rotary dryer which is high efficient in drying the wood and biomass

material. It can realize to reduce the moisture from 50% to 10%.It is very important for 

wood pellet plant to using moisture detector which will determine the most suitable 

moisture before pelletizing.

Pelletizing process - Wood pellet mill

Wood pellet mill is the heart of the wood pellet production line, and has reliable running 

performance. It is special designed for compacting of wood, straw, and other biomass 

sources into pellets. Capacity ranges from 1T to 10T per hour. Our MZLH series Ring die 

pellet mill is best choice for large scale production.

Cooling process - Counterflow cooler

Usually after pelletizing, the temperature of wood pellets is between 60-80 degrees and 

the moisture content is close to 15%. For storage purposes,a cooler must beused to 

reduce their surface temperature and the moisture content, also help screen good and

pure pellets. 

Packing process - Packing machine

After cooling process, the wood pellets will not directly enter into the fuel process, avoiding 

the wood pellet affected with damp, the packing process is very necessary. The packing 

process is effectively handled by our Semi-Auto Packing Machine.

Please kindly note: Not all these processes are necessary for you. These are common 

processes for your reference. we will customize the complete solution as per your raw 

materials condition and your request for capacity. 


Our service

As a professional and experienced supplier of turn-key projects in China, we have the ability

to provide full services for customers:

1. Complete project design

2. Equipment manufacture and project engineering

3. Machinery delivery service to most of the locations in the world

4. Plant installation and commissioning service

5. Staff training and project managements

6. Spare parts supply and lifelong consultation service

7. Possible financial and banking services for some projects