E-mail: info@fdsp-cn.com
Tel: +86-025-66621288-808

High Capacity Complete Rice Husk Pellet Production Line

Introduction for Complete Rice Husk Pellet Production Line :

 

1.The production line includes wood crushing (if the raw material is not already granulated), material sieving, drying (if the raw material

 contains too much moisture), pelletizing, cooling, screening and packing. The whole pelletizing process 

can be highly automatically controlled and  customized.

2.This is whole system automatic production line with different capacity demand and raw materials 

information. 3.The production line could suitable for raw materials like: rice husk, sawdust, rice straw, cotton stalks, 

corn stalks,  peanut straw, grape straw, dry hay, grass, forest wood logs, forest wood branch, forest wood 

waste, wood waste, etc. Kinds of biomass waste. 4.High density, smooth surface, 6mm diameter or 8mm diameter, 33mm (20-50mm adjustable)length pellets you will get.


Complete Rice Husk Pellet production line process 

(a) Peeling Process 

Wood debarker machine is applicable to peel the log of MDF board and papermaking industry, it is mainly used to peel log, small wood and so on, the peeled rate is more than 95 percent. 

(b) Chipping Process 

In the pellet plant before raw materials are made into biomass pellets, they are first reduced into much smaller, uniformly-sized particles. When the thicknedd is larger than 10mm or the size is greater than 50*50mm, a chippper is needed to chip these materials into smaller pieces. 

(c)Grinding Process 

The hammer mill is used to further crush these small pieces into particles of less than 3mm in diameter. 

(d)Drying Process 

After raw materials are crushed a dryer is needed since most raw wood materials havea moisture content of about 50%. However, the optimal moisture content for pelletiztionis 13%-15%. Therefore a rotary dryer is included in the pellet plant to reduce the moisture content. After crushing and drying you can begin making wood pellets.

 (e)Pelletizing Process 

After crushing and drying the raw material properly it is then ready for the pellet mill. The pelletizing machine or press is the key piece of machinery in the pellet plant. It should be mentioned that impurities in the raw materials like metal or stone,may damage the die and rollers of pellet making machine. 


(f)Cooling Process 

Usually after pelletizing, the temperature of pellets is between 60-80 degrees and the moisture content is close to 15%. For storage purpose, a cooler must be used to reduce their surface temperature and moisture content. 

(g)Packing Process 

Finally is the packing process. In order to protect the wood pellets becoming getting damp and to increase storability, proper packing is necessary.


Item

Complete Rice Husk Pellet Production Line

Suitable Raw Material

wood, sawdust, sugar cane, bamboo, rice husk, grass, straw, etc, and 

some special raw materials like rubber, clay and plastic as well..

After-sale guarantee

One year warranty and all around after-sale service.

Technical Parameters 

- Capacity: 0.5t/h-30t/h or even more

- Dimensions: Designed according to specific requirements

- Power consumption: would be listed in the quotation, 

actual consumption is 20-30% lower than theory.

Features

- Top technology with national patent

- Customized design and reasonable price.

- Non-dust workshop with experienced engineers.

- Main machines adopt Siemens motor and imported SKF/NSK bearing.

- PLC control(Siemens) and Schneider or Soft Starter electric control system.

- Long service time and stable operation.

Guide installation and commissioning is available.

Packing Details

 Iron case or iron pallet etc

MOQ

 Set

Payment

 L/C, T/T, Western Union, Money Gram as client require

Warranty

 1 year

 

Biomass pellet application:


If you want a quotation for a biomass pellet plant please kindly let us know:

 

(1) What capacity would your prefer?

We can design the pellet plant with capacity of 1-30 tons per hour or even more.

 

(2) What is the moisture content of your raw material?

Better to be 10-15%.( If large than this, then we will recommend your Dryer Machine)

 

(3) Final Pellets Size?

We have Diameter for Pellets: 6mm, 8mm, 10mm, 12mm, (Different Diameters for your 

requirement.)

 

We will customize the design and make a complete offer for you.

 

Our certificates and honours:

FAQ

1.How does your factory do regarding quality control?
Our factory has gained CE, ISO9001, SGS authentication.'Quality is priority'. We always pay great attention on quality controlling from the beginning to the end. 

2.How long is your guarantee?
One year. After this period we will definitely support you when needed. You are welcome to contact us at any time.

3.Will you send engineers to install the plant? 
Yes, we can send our engineers do the guide installation overseas.

4.Where is your company located? How can I get there? 
Our company is located in Nanjing City, Jiangsu Province, China, near Shanghai. 
If you arrived Nanjing Lukou International Airport, you can come to our company by Car about 30 Mins. Or you arrive Shanghai Hongqiao Airport, you can by train about 1.5H.

5. Where is your factory located? How can I visit there? 
Our factory is located in Liyang City, Jiangsu Province, China, near Shanghai; and our International Business Centre is in Nanjing City. You can fly to Shanghai airport or Nanjing Airport directly. All our clients, from home or abroad, are warmly welcome to visit us!